Teaching

Theory classes

Sl. No.	Title of course taught	Postgraduate/ Undergraduate	Sole instructor or with others	Year
1	Engineering Mechanics	UG	Sole	14, 15, 18, 19, 20, 21
2	Solid Mechanics	UG	Sole	13, 14, 15, 16, 21
3	Advanced Solid Mechanics	UG	Sole	14, 15, 16, 23(summer)
4	Composite Materials	PG / UG	with other / Sole	16, 17, 18 , 19, 20, 22, 24(W-Sem),
5	Applied Elasticity	PG (3 Yrs.)	with other	15, 16, 17, 24
6	Plates & Shells / NMED 506 Theory of Plates & Shells	PG	Sole	17, 18, 24(W-Sem), 25(W-Sem)
7	Fracture Mechanics	PG	Sole	19
8	Mechanics of Composite Materials			23 (M-Sem),
9	MEC500/NMEC-500 - Theory of Elasticity	PG	Sole	24 (M-Sem), 25 (M-Sem)

Practical classes

Sl. No.	Title of course taught	Postgraduate/ Undergraduate	Sole instructor or with others	Year
1	Solid Mechanics Lab	UG	with other	13, 14, 15, 16, 17, 18, 19
2	Soft computing lab	UG	with other	14, 15, 16, 17, 18, 19, 20
1	MEC537- Computer Aided Engineering Design Lab	PG	with other	21
2	MEC204- Applied mechanics lab	UG	With other	20, 21, 22, 23, 24 (M-Sem)
3	MEC 600 (Major specialization PG design lab)	PG	Sole	23 (W-Sem),
4	MEC601 Mechanical Engineering Lab - II	PG	with other / Sole	24 (W-Sem), 25 (W-Sem),

Academics

EDUCATION:

Ph.D. in Mechanical Engineering

`Thesis Title: Phase-Field Simulation of Grain Growth in Presence of Second Phase Particles`

(National University of Singapore, Singapore)

Master of Technology(M.Tech) in Applied Mechanics

`Thesis Title: Buckling of Laminated Thick Annular Plates and Shallow Caps`

(Indian Institute of Technology Delhi, India)

Bachelor of Engineering (BE) in Mechanical Engineering

(Jalpaiguri Govt. Engg. College, North Bengal University, India)

POST-DOCTORAL RESEARCH (2009) :

`Project: Design and optimization of surfaces for auto-manipulation of sessile drops (2009)`

(National University of Singapore, Singapore)

VISITING SCIENTIST:

2017 (June - July): UMET University of Lille-1 Science & Technology, Villeneuve d'Ascq, France.

2025 (June - July): Institute of Surface Science, Helmholtz-Zentrum Hereon, Geesthacht, Germany.

INTERNATIONAL COLLABORATION:

Research Stay (2017), Department of Mechanical Engineering, National University of Singapore, Singapore.
Joint R&D project with Prof. Manoj Gupta, NUS, Singapore, and Prof. Prakash Thaburaja, UKM, Malaysia.
Collaboration with VSB-Technical University, Czech Republic.
Collaboration with Miami University, Oxford, OH, USA.

SHORT TERM COURSES ORGANISED: 04 (Four)

1. Two-week ISTE-AICTE Programme on “Translating Ideas into Products and Patents” during 17th February, 2003 to 28th February, 2003, India. (Sponsored by ISTE)

2. Two-week AICTE sponsored Staff Development Programme (SDP) on “Recent Advances in Mechanics and their Application in Nano Engineering and Technology” during 1 - 12 th August, 2011, India. (Sponsored by AICTE): (Sanction order: RIFD/SDP/59/2010-11 dated 28.02.2011)

3. One day workshop on “Recent Advances in Material Science” held on 27.07.2019 (Sponsored by SERB, DST)

4. Host faculty of GIAN (Global Initiative Academic Network) Programme on “Hybrid Micro and Nano Machining Processes” supported by Ministry of Education, Govt. of India. The programme was held during 02-06th January, 2023, India. (Foreign Faculty: Md. Pervej Jahan, University of Miami, Oxford, USA.

5. Three days workshop on "Thermo-mechanics and Design of Mechanical Systems (17th– 19th July, 2025).

CONFERENCES ATTENDED:

14. 8th International Conference on Materials Engineering and Applications (ICMEA 2025), January 15 - 19, Chulalongkorn University, Bangkok, Thailand.

13. 11th International Conference on Advanced Technology (ICAT) 2023, August 17 –19, ISTANBUL, Turkey.

12. 27th International Meeting THERMOPHYSICS 2022, October 4– 6, 2018, Dalesice Brewery, Czech Republic.

11. 23rd International Meeting THERMOPHYSICS 2018, November 7 – 9, 2018, Smolenice, Slovakia

10. 22nd International Conference on "Processing and Fabrication of Advanced Materials (PFAM XXII)", 18 – 20 December, 2013, Singapore.

9. McMat - 2011, ASME 2011 - Applied Mechanics and Materials Conference, Chicago - Illinois, May 30 - June 1, 2011, USA.

8. ICN-10, International conference on Nanomaterials: Synthesis, charecterization and application, M.G University, Kottayam, 26 - 28 th April, 2010, India.

7. HTHSSM-09, International Conference on High Temperature and High Strength Structural Materials, held in Hong-Kong Poly. University, Hong-Kong, 04-08 th October, 2009, Hong-Kong.

6. Phase-08, International Focus Workshop on Phase field simulations: Material science meets biology and medicine held at Max Planck Institute, 12 –14th November, 2008, Germany.

5. ICAP-08, International conference on applied physics, held at Heidelberg, 24-26th September, 2008, Germany.

4. 10th Granada Seminar on computational and statistical physics held at the University of Granada, 15-19 th September, 2008, Spain.

3. 48th Congress of Indian Society for Theoretical Applied Mechanics (An Int. Meet) held in Birla Institute of Technology, Dec., 2003, India.

2. ‘12th Indian Society of Mechanical Engineers (ISME) Conference’ held in Cresent Engineering College, Jan., 2001, India.

1. ‘International Conference on Recent Advances in Mathematical Sciences (ICRAMS)’ held in Indian Institute of Technology, Kharagpur, Dec., 2000, India

EXAMINER FOR THE FACULTY SELECTION

Central Universities
National Institute of Technology (NITs)

REVIEWER FOR INTERNATIONAL PROJECTS

Reserach rpoposal submitted to the Univerity at UAE
Reserach rpoposal submitted to the Univerity at ISRAEL

RELEVANT GRADUATE-LEVEL COURSE WORK ATTENDED:

During Ph.D. : Applied Plasticity, Structures & Properties of Materials, Plates & Shells, Fracture Mechanics and Applications, Modeling of Machining Processes, and Advanced Research Topics in Applied Mechanics

During M.Tech. : Applied Elasticity, Advanced Fluid Mechanics, Advanced Dynamics, Experimental Methods in Solid and Fluid Mechanics, Applied Computational Methods, Mechanics of Composite Materials, Applied Plasticity, Theory of Plates and Shells, Finite Element Methods, Product Reliability and Maintenance, and Design Methods.

PROFESSIONAL SKILLS:

Instruments: Scanning Electron Microscope (SEM), Field Emission Scanning Electron Microscope (FESEM), X-Ray Diffraction (XRD) OTHERS: Milling Machine, Glove Box, Universal Testing Machine (Instron), and Argon Furnace, Compaction of nanopowders, Sintering (Microwave and Conventional)

Computer : (i) Professional Software: Fortran, Matlab, ANSYS, Excel, Origin.

ACADEMIC REVIEWER:

1. "Pegasus - Short" application (postdoctoral fellowship application) to the Research Foundation Flanders – FWO (Belgium).

2. J. Polym. Materials.

3. Modelling and Simulation in Material Science & Engineering

4. J. of Material Sci. & Engineering

5. Sci. & Engineering of Composite Materials

6. Philosophical Magazine Letters

7. Defense Technology

8. Engineering Computations

9. Heat Transfer - Asian Research

10. Ain Shams Engineering Journal

11. International J. of Heat and Mass Transfer

12. Materials Research

13. International Journal of Thermal Sciences

14. J of Applied Polymer Science

15. Journal of The Institution of Engineers (India)

16. Materials Research Express.

17. Applied Surface Science

18. Bioactive Materials

19. Journal of Magnesium and Alloys

20. Materials Today Communications

21. Case studies in thermal engineering

22. Materials Chemistry and Physics

23. Heliyon

24. Tribology and Materials

25. Tribology International

26. Acta Biomaterialia

EDITORIAL BOARD MEMBER:

International Journal of Metallic Materials

ACADEMIC ADMINISTRATIVE ACTIVITIES:

Hostel Warden, NERIST, Nirjuli - 79119
Chairman, Transport (2010 - 2011), NERIST, Nirjuli - 79119
Vice-chairman Exam for School of Engineering (Spring Sem. 2012), Tezpur University
Coordinator (2015 - 2018), M.Tech. (Design), IIT Dhanbad
Associate Dean (Student Welfare) (2018-2021), IIT Dhanbad
Coordinator, Industry Institute Interaction Facility (IIIF), Kolkata and Delhi Centre (2018 - 2021)
Member of Faculty Selection Committee

Position

Full Professor (Aug 2023 – present): Indian Institute of Technology (ISM) Dhanbad

Associate Professor (June 2013 – Aug 2023) : Indian Institute of Technology (ISM) Dhanbad

Associate Professor (Aug 2011 – June 2013) : Tezpur Central University, Assam

Associate Professor (Feb 2010 – Aug 2011) : North Eastern Regional Institute of Science & Technology (NERIST), An MHRD Institute

Lecturer (Jan 2000 – Aug 2005) : North Eastern Regional Institute of Science & Technology (NERIST), An MHRD Institute

Awards and Honors

Fellowship Awarded
Sl No.	Details
1	Qualified in Graduate Aptitude Test for Engineers (GATE), India
2	2005 - 2009: NUS Research Fellowship (Doctoral) from National University of Singapore (Scholarship SGD 2500 p.m. + full registration fee waiver in all the semesters).
3	2009: Postdoctoral fellowship award at "Interdisciplinary Centre for Advanced Material Simulation (ICAMS), Ruhr-Universität Bochum, Germany" (could not avail because of overlap with NUS postdoctoral research fellow award).
4	2009: Postdoctoral Research Fellow, National University of Singapore (Availed) (Salary SGD 50000 per annum)
5	2012: Postdoctoral fellowship award at "VSB Technical University, Ostrava, Czech Republic" (could not join because of the overlapping of joining as Associate Professor at IIT Dhanbad).
6	*2014: NSERC Visiting Fellow* (salary CAD 49,513 per annum + Travel allowance along with spouse and dependant children) at CANMET, Hamilton, Canada, for 2014-15. (Could not avail due to the 2-year provisional period at IIT Dhanbad).
External Grant Received
Sl No.	Details	Funding Agency
1	2008: CNA Summer workshop on Contemporary Topics in Nonlinear PDEs to be held at the Center for Nonlinear Analysis, Department of Mathematical Sciences, Carnegie Mellon University, Pittsburgh, Pennsylvania (USA). (could not avail due to late approval of USA VISA)	Carnegie Mellon University, USA
2	2008: Phase-08, International Focus Workshop on Phase field simulations: Material science meets biology and medicine held at Max Planck Institute, Germany. (Availed)	Max Planck Institute, Dresden, Germany

Publications

Books Published

Book chapter

5. Alamgir, M., Panchal, M., Mallick, A., Nayak, G.C., Kumar Singh, S. (2023). Introduction of Metal Nanoparticles, Dental Applications, and Their Effects. In: Tiwari, S.K., Kumar, V., Thomas, S. (eds) Nanoparticles Reinforced Metal Nanocomposites. Springer Nature, Singapore. https://doi.org/10.1007/978-981-19-9729-7_2

4. Ved Prakash Dubey, M. Kopec, A. Mallick, Z. L. Kowalewski, 2021, The Effect of Enhanced Solid Solubility on the Microstructure and Mechanical Properties of Al-Cr Solid Solution by Powder Metallurgy Process, MATERIAŁY I TECHNOLOGIE XXI WIEKU (ISBN 978-83-7880-776-6)

3. M.S. Kujur, Ved Prakash Dube, A. Mallick*, M. Gupta, 2021, Tensile Characteristics of Metal Matrix Composites, Encyclopedia of Materials: Composites, Elsevier (https://doi.org/10.1016/B978-0-12-819724-0.00100-2) (Citation as: Milli S. Kujur, Ved P. Dubey, Ashis Mallick, Manoj Gupta, Tensile Characteristics of Metal Matrix Composites, Reference Module in Materials Science and Materials Engineering, Elsevier, 2021, ISBN 9780128035818, https://doi.org/10.1016/B978-0-12-819724-0.00100-2.)

2. P. Kumar, B.K. Roy, A. Mandal, A. Mallick, M. Gupta, 2021 Influence of Spindle Rotational Speeds on Pure Mg and 0.1GNP-3Al-Mg Alloy-Nanocomposite in Wire Electrical Discharge Turning Process, Sharma, B.P., Rao, G.S., Gupta, S., Gupta, P., Prasad, A. (Eds.), Advances in Engineering Materials, Lecture Notes in Mechanical Engineering, Springer Nature, Singapore

1. Kujur M.S., Manakari V., Parande G., Doddamani M., Mallick A., Gupta M., 2019, Role of Rare Earth Oxide Reinforcements in Enhancing the Mechanical, Damping and Ignition Resistance of Magnesium. In: Srivatsan T., Gupta M. (eds) Nanocomposites VI: Nanoscience and Nanotechnology in Advanced Composites. The Minerals, Metals & Materials Series. Springer, Cham (https://doi.org/10.1007/978-3-030-35790-0_10).

List Of Research Publications (only in Peer-reviewed Journals)

Journal Papers (* indicates corresponding author)

83. V. Sharma, A. Mallick*, J. Joardar, S. Kumar and S. V. Konovalov, 2024, Nanostructured Al-Ti-Fe-Mn-Ni High-Entropy Alloy by Mechanical Alloying: Synthesis and Characterization , Arabian Journal for Science and Engineering . DOI: https://doi.org/10.1007/s13369-024-08805-0

82. V. Sharma, Rahul MR, A. Mallick*, 2024, Microstructural, mechanical, and tribological behaviors of Cu40Fe30Mn20Cr5Ti5 high entropy alloy via powder metallurgy route, Materials Today Communications, 38, 108313. DOI: https://doi.org/10.1016/j.mtcomm.2024.108313

81. M.S. Kujur, A. V. Krishsnan, V. Manakari, G. Parande, Hajo Dieringa, A. Mallick and M. Gupta, 2024, Scope of magnesium ceria nanocomposites for mandibular reconstruction: Degradation and biomechanical evaluation using a 3D -dimensional finite element analysis approach, J. of the Mech. Behavior of Biomedical Materials, 152, 106424. https://doi.org/10.1016/j.jmbbm.2024.106424

80. A. Mallick*, S. Deka, V. Sharma, A. Kumar, 2023, Strain rate dependent mechanical behavior of nanostructured Mg-3%Al alloys, J. of Int. Scientific Publications: Materials, Methods & Technologies, 17, 53–62. DOI: https://doi.org/10.62991/MMT1996349817.

79. S. Deka, F Mozafari, A. Mallick*, 2023, Microstructural, mechanical, tribological, and corrosion behavior of ultrafine bio-degradable Mg/CeO2 nanocomposites: Machine learning-based modeling and experiment, Tribology International, 190, 109063

78. S. Deka, F Mozafari, A. Mallick*, 2023, A comprehensive experimental and modeling study of the strain rate-and temperature-dependent deformation behavior of bio-degradable Mg-CeO2 nanocomposites, Composites Part A: Applied Science and Manufacturing, 107936

77. V. Sharma, A. Mallick*, M Gupta, 2023, Enhancing significantly the strength and tribological response of Al7075 alloy using nano-ZrO2 reinforcement, J. of Mat. Res. and Tech., 27, 7280-7292.

76. A. Mallick*, Panchenko I.A., Konovalov S.V., 2023, Effect of ball-milling on mechanical properties of Mg – 3 % Al alloys, Bulletin of the Siberian State Industrial University, 2 (44), 72–78. (In Russ.). http://doi.org/10.57070/2304-4497-2023-2(44)-72-78

75. A. Dewangan, A. Mallick and A. K. Yadav et al., 2023, Production of oxy-hydrogen gas and the impact of its usability on CI engine combustion, performance, and emission behaviors, Energy, 278, 127937.

74. A. Dewangan, A. Mallick, AK Yadav, A Ahmad, D Alqahtani, S Islam, 2023, Combined effect of operating parameters and nanoparticles on the performance of a diesel engine: response surface methodology-coupled genetic algorithm approach, ACS omega 8 (27), 24586-24600.

73. V. Sharma, A. Mallick*, K. Kumar, 2023, Effect of graphene nanoplates on the mechanical and corrosion properties of aluminium nanocomposite fabricated by powder metallurgy, Tribology and Materials, 2 (4), 154-161.

72. Gaurav Kumar Sharma, A. Mallick, R.K. Sharma, Navneet Kumar, D. B. Singh, 2023, A comprehensive study on the effect of variation of flow rate of fluid and N on energy metrics of N similar photovoltaic thermal flat plate collectors integrated single slope solar still, Desalination and Water Treatment, 283, 97 - 108.

71. S. Deka, F. Mozafari, A. Mallick*, P Thamburaja, M. Gupta, 2023, Development of high-performance nanostructured aluminum and its constitutive modeling, Mechanics of Advanced Materials and Structures https://doi.org/10.1080/15376494.2023.2262733.

70. A. Dewangan, A. Mallick, 2022, Multi-objective optimization of performance and emission characteristics of diesel engine fueled with Bauhinia variegata biodiesel using hybrid approach, Int. J. of Environmental Sci. & Tech., 19 (12), 12395.

69. A Dewangan, AK Yadav, A Mallick, A Pal, S Singh, 2022, Comparative study of Manilkara zapota and Karanja based biodiesel properties and its effect on diesel engine characteristics, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44 (2), 5143-5153.

68. Sanjeev Kumar Sharma, A. Mallick, Desh Bandhu Singh, Gopal Nath Tiwari, 2022, Experimental study of solar energy–based water purifier of single-slope type by incorporating a number of similar evacuated tubular collectors, Environmental Science and Pollution Research, 29, 6837–6856 (Q1) (IF: 5.19).

67. Gaurav Kumar Sharma, A. Mallick, Ram K Sharma, Ritvik Dobriyal, Navneet Kumar, D. B. Singh, 2022, An investigation on dissimilarity of mass flow rate and Non exergo‑enviro‑economic parameters for solar still of single slopetype integrated with N similar PVT flat plate collectors having series connection, Environmental Science and Pollution Research (doi.org/10.1007/s11356-022-20406-8) (Q1) (IF: 5.19).

66. V. Venkitesh and A.Mallick*, 2022, Thermal analysis of a convective–conductive–radiative annular porous fin with variable thermal parameters and internal heat generation, J. of Ther. Analysis and Calorimetry, 147, 1519 - 1533 (Q1) .

65. D.K. Das, A. Mallick, and S.K. Singh, 2022, Estimating thermal properties of plumbene by multiscale modeling using Molecular dynamics simulation technique, Mechanics of Advanced Materials and Structures, 29, 2119 - 2125. (Q1). (https://doi.org/10.1080/15376494.2020.1852347). (IF: 4.03)

64. M. S. Kujur, A. Mallick* and M. Gupta, 2021, Development of Magnesium Nanocomposites by Powder Metallurgy for Multifunctional Applications: Review, Current Nanomaterials, 6, 185– 206.

63. Md. Alamgir, G.C.Nayak, A. Mallick* and S. Sahoo, 2021, Effects of TiO2 and GO on the thermo-mechanical properties of bioactive poly-HEMA nanocomposites, Iranian Polymer Journal, 30, 1089–1099.).

62. M. Alamgir, A. Mallick∗ and G.C Nayak, 2021, Mechanical and thermal behavior of pHEMA and pHEMA nanocomposites targeting for dental materials, Applied Nanoscience, 11, 1257–1265 (Q3).

61. P. Kumar, K. Skotnicova, A. Mallick, M. Gupta, T. Cegan and J. Jurica, 2021, Mechanical Characterization of Graphene Nanoplatelets-Reinforced Mg-3Sn Alloy Synthesized by Powder Metallurgy, Metals, 11, 62 (https://doi.org/10.3390/met11010062), (Q2).

60. S. Deka, A. Mallick*, P.P. Behera and P. Thamburaja, 2021, Thermal stresses in a functionally graded rotating disk: an approximate closed-form solution, J. of Thermal Stresses, 44 (1), 20-50, (Q2)

59. M.S. Kujur, V. Manakari, G. Parande, S. Prasadh, R. Wong, A. Mallick and M. Gupta, 2021 “Effect of Samarium Oxide Nanoparticles on The Degradation And In Vitro Biocompatibility of Magnesium for Biomedical Applications”, Materials Today Communications, 26, 102171 (IF: 2.678, )

58. M.S. Kujur, V. Manakari, G. Parande, S. Prasadh, R. Wong, A. Mallick* and M. Gupta, 2021 “Development of Rare-earth Oxide Reinforced Magnesium Nanocomposites for Orthopedic Applications: A Mechanical/Immersion/Biocompatibility Perspective”, J. of the Mechanical Behaviour of Biomedical Materials, 114, 104162, (IF: 3.372, Q2: Materials Science /Biomedical / Biomaterials)

56. D. B. Singh, G. Bansal, H. Prasad, A. Mallick, N. Kumar, S. K. Sharma, 2021, Sensitivity Analysis of N Undistinguishable PVT Compound-Parabolic-Concentrator-Collectors (Partly Covered, 50%) Integrated Single Slope Solar Distiller Unit Journal of Solar Energy Engineering(ASME), 143, 021003-1.

55. P. K. Roy, H. Mondal, A. Mallick, and D. K. Prasad, 2020, Inverse and efficiency of heat transfer convex fin with multiple nonlinearities, Heat Transfer, Heat Transfer. 50 (1), 158–178.

54. S. K. Sharma, A. Mallick, S. K. Gupta, N. Kumar, D. B. Singh, G.N. Tiwari, 2020, Characteristic equation development for double slope solar distiller unit augmented with N identical parabolic concentrator integrated evacuated tubular collectors, Desalination and Water Treatment¸187, 178–194. (Q4)

53. P. Kumar, A. Mallick∗, M. S. Kujur, K. S. Tun and Manoj Gupta, 2020, Synthesis and analysis of Mg–3%Al alloy nanocomposites reinforced by RGO", Materials and Manufacturing Processes, 35, 1650 - 1660. (Q2)

52. S. K. Sharma, D.B. Singh, A. Mallick, S.K. Gupta, 2020, Energy metrics and efficiency analyses of double slope solar distiller unit augmented with N identical parabolic concentrator integrated evacuated tubular collectors: A comparative study, Desalination and Water Treatment, 195, 40-56. (Q4)

51. S. K. Sharma, D. B. Singh, N. Kumar, A. Mallick, S.K. Gupta, 2020, Energy, exergy and cost analyses of double slope solar distiller unit augmented with N identical parabolic concentrator integrated evacuated tubular collectors: A comparative study, Journal of Solar Energy Engineering: Including Wind Energy and Building Energy Conservation, (In press)

50. H. Prasad, P. Kumar, R.K. Yadav, A. Mallick, N. Kumar, D.B. Singh, 2019, Sensitivity analysis of N identical partially covered (50%) PVT compound parabolic concentrator collectors integrated double slope solar distiller unit, Desalination and Water Treatment, 153, 54–64. (Q4)

49. M. Alamgir, A. Mallick, G.C Nayak, S.K Tiwari, 2019, Development of PMMA/TiO2 nanocomposites as excellent dental materials, J. of Mech. Sci. and Tech. 33 (10), 4755-4760 (Q3)

48. A. Dewangan, A. K. Yadav, and A. Mallick, A. Pal, S. Singh, 2019, Comparative study of Manilkara zapota and Karanja based biodiesel properties and its effect on diesel engine characteristics, Energy Source, Part A: Recovery, Utilization, and Effects (Q3) https://doi.org/10.1080/15567036.2019.1661551.

47. D. B. Singh, N. Kumar, Harenderc, S. Kumar, S. K. Sharmae, A. Mallick, 2019, Effect of depth of water on various efficiencies and productivity of N identical partially covered PVT collectors incorporated single slope solar distiller unit, Desalination and Water Treatment, 138, 99–112. (Q4)

46. A.K. Singh, D.B. Singh, A. Mallick, Harenderd, S.K. Sharma, N. Kumar, V.K. Dwived, 2019, Performance analysis of specially designed single basin passive solar distillers incorporated with novel solar desalting stills: A review, Solar Energy, 185, 146-164. (Q1: Material Science)

45. R, Ranjan, A.Maliick* , P Jana, 2019, 2019, Thermoelastic study of a functionally graded annular fin with variable thermal parameters, J of Thermal Stresses, 42, 1272-1297. (Q1: Material Science / Condensed Matter Physics).

44. P. Kumar, A. Mallick∗, M. S. Kujur, K. S. Tun and Manoj Gupta, 2019, Effects of graphene nanoplatelets on the tribological, mechanical, and thermal properties of Mg-3Al alloy nanocomposites, Int. J. of Materials Research, 110, 534-542. (Q3)

43. A. Mallick*, R. Ranjan and Dilip K. Prasad, 2019, Inverse estimation of variable thermal parameters in a functionally graded annular fin using dragon-fly optimization, Inverse problem in Sci. & Engg., 27, 969 - 986, (Taylor & Francis) (Q2: in comp. Sci & Tech.)

42. A. Mallick*, Dilip K. Prasad and P. P. Behera, 2019, Stresses in radiative annular fin under thermal loading and its inverse modeling using Sine Cosine Algorithm (SCA), J. of Thermal Stresses, 42, 401–415 (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics)

41. A. Dewangan, A. K. Yadav, and A. Mallick, 2018, Current scenario of bio-diesel development in India: prospects and challenges, Energy Source, Part A: Recovery, Utilization, and Effects, 40, 2494 - 2501 (Taylor & Francis) (Q3: Energy Engg & Power Tech.)

40. A.K. Singh, D.B. Singh, A. Mallick, N Kumar, 2018, Energy matrices and efficiency analyses of solar distiller units: A review, Solar Energy, 173, 53–75 (Elsevier) (Q1: Material Science)

39. K. B. Mardi, A.R. Dixit, A. Mallick, A.R. Reddy, 2018, Effect of Al2O3 nanoparticles on tribological behaviour of Mg-6Al alloy-based nanocomposites, Int. J. of Surface Science and Engineering, 12, 402-218 (Q2: Mechanical Engineering)

38. A. K. Yadav, A. Dewangana, A. Mallick, 2018, Effect of Additives (n-Butanol and Diethyl Ether) on Performance and Emission Characteristics of a Diesel Engine Fuelled with Diesel-Pongamia Biodiesel Blend, Journal of Energy Engineering, 2018, 144(6): 04018062 (ASCE) (Q2)

37. M. S. Kujur, V. Manakari, G. Parande, K. S. Tun, A. Mallick* and M. Gupta, 2018, Enhancement of Thermal, Mechanical, Ignition and Damping Response of Magnesium using Nano-Ceria Particles, Ceramics International, 44, 15035–15043 (Elsevier). (Q1: Ceramic composites)

36. K. Bimla Mardi, A. Mallick*, A. R. Dixit, 2018, M. Gupta, 2018, Enhancing Compressive Response of Mg-6Al Alloy using Al2O3 Nanoparticles, Kovove Materialy-Metallic Materials, 56, 183–190 (Q3: Materials Chemistry)

35. R. Ranjan and A. Mallick*, 2018, An efficient unified approach for performance analysis of functionally graded annular fin with multiple variable parameters, Thermal Engineering, 65, 614–626 (Springer) (Q2: Energy Engineering & Power Technology)

34. A. K. Yadav, A. Dewangana, A. Mallick, 2018, Synthesis and Stability Study of Biodiesel from Kachnar Seed Oil, J. of Energy Eng., 144(5): 04018053 (ASCE) (Q2: Civil & Structural Engineering)

33. P. K. Roy, A. Mallick, H. Mondal, P. Sibanda, 2018, A Modified Decomposition Solution of Triangular Moving Fin with Multiple Variable Thermal Properties, Arabian Journal for Sci. and Engg., 43, 1485–1497 (Springer) (Q2: Multidisciplinary)

32. P. Kumar, A. Mallick*, M.S. Kujur, K.S. Tun, R. Shabadi, M Gupta, 2018, Strength of Mg/3%Al alloy in presence of graphene nano-platelets as reinforcement, Materials Science and Technology, 34, 1086–1095 (Taylor & Francis) (Q2: Condensed Matter Physics)

31. Md. Alamgir, G.C.Nayak, A. Mallick*, S. K. Tiwari, S. Mandol and M. Gupta, 2018, Processing of PMMA nanocomposites reinforcing with biocompatible nanoparticles of GO and TiO2, Materials and manufacturing processes, 33, 1291–1298 (Taylor & Francis) (Q2: Industrial and manufacturing physics)

30. M. S. Kujur, A. Mallick*, V. Manakari, G. Parande, K. S. Tun, and M. Gupta, 2017, Significantly Enhancing the Ignition/Compression/Damping Response of Monolithic Magnesium by Addition of Sm2O3 Nanoparticles, Metals, 7, 357 (Appeared as a cover page article). (Q1: Matallurgy & Metallugical Engg.)

29. P. K. Roy, A. Mallick, H. Mondal, S. Goqo, P. Sibanda, 2017, Numerical study on rectangular-convex-triangular profiles with all variable thermal properties, Int. J. of Mechanical Sciences, 133, 251-259 (Elsevier) (Q1: Civil and Structural Engg.)

28. A. Dewangan and A. Mallick, 2017, Ultrasonic-assisted production of biodiesel from Manilkara Zapota (L.) seed oil, Energy Source, Part A: Recovery, Utilization, and Effects, 39, 1594-1601 (Taylor & Francis). (Q3: Energy Engg & Power Tech.)

27. K Bimla Mardi, AR Dixit, A Mallick, 2017, A. Pramanik, B. Ballokova, P. Hvizdos, J. Foldyna, J. Scucka, P. Hlavacek, M. Zelenak, 2017, Surface integrity of Mg-based nanocomposite produced by Abrasive Water Jet Machining (AWJM), Materials and Manufacturing Processes, 32, 1707 - 1714 (Taylor & Francis). (Q1: Industrial and manufacturing physics)

26. K Bimla Mardi, AR Dixit, A Mallick, 2017, Studies on Non-traditional Machining of Metal Matrix Composites, Materials Today: Proceeding, 4, 8226–8239 (Elsevier). (quartile not assigned yet)

25. R. Ranjan, A. Mallick*, D. Kumar, 2017, Closed-form solution for a conductive-convective-radiative annular fin with multiple nonlinearities and its inverse analysis, Heat and Mass Transfer, 53,1037–1049 (Springer) (Q2: Fluid flow and transfer process)

24. A. Mallick*, R. Ranjan, D. Kumar, R. Das, 2016, Inverse prediction and application of homotopy perturbation method for efficient design of an annular fin with variable thermal conductivity and heat generation, Mathematical Modelling and Analysis, 21, 699 – 717 (Taylor & Francis) (Q3: Modeling and Simulation)

23. A. Mallick*, R. Ranjan, P.K. Sarkar, 2016, Effect of heat transfer on thermal stresses an annular hyperbolic fin: An approximate analytical solution, J. of Theo. and Applied Mechanics, 54, 437 - 448 (ptmts, Poland) (Q3: Mathematics)

22. A. Mallick*, 2016, Improvement of mechanical properties in light weight Mg-based materials, Procedia Engineering, 149, 283 – 287 (Elsevier) (Quartile not yet assigned)

21. P.K. Roy, A. Mallick, 2016, Thermal analysis of straight rectangular fin using homotopy perturbation method, Alexandria Engineering Journal, 55, 2269 – 2277 (Elsevier). (Q1: Engineering)

20. A. Mallick*, R. Ranjan, R.Das, 2016, Application of homotopy perturbation method and inverse prediction of thermal parameters for an annular fin subjected to thermal Load, J. Thermal Stresses, 39, 298 - 313 (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics)

19. P.K.Roy, H. Mandol, A. Mallick, 2015, A decomposition method for convective–radiative fin with heat generation, Ain Shams Engg. Journal, 6, 307 - 313 (Elsevier) (Q1: Engineering).

18. P. K. Roy, A. Das, H. Mondal, A. Mallick, 2015, Application of homotopy perturbation method for a conductive–radiative fin with temperature dependent thermal conductivity and surface emissivity, Ain Shams Engineering Journal, 6, 1001-1008 ((Elsevier) (Q1: Engineering).

17. A. Mallick*, S. Ghosal, P. K. Sarkar, R. Ranjan, 2015, Homotopy Perturbation Method (HPM) for Thermal Stresses in an Annular Fin with Variable Thermal Conductivity, J. Thermal Stresses, 38, 110 - 132, 2015 (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics).

16. A. Bhowmik, Ranjan Das, R. Repaka and A. Mallick, 2014, Inverse modelling of a solar collector involving Fourier and non-Fourier heat conduction, App. Mathematical Modelling, 38, 5126 - 5148 (Elsevier) (Q1: Modeling and Simulation)

15. A. Mallick and R. Das, 2014, ‘Application of Simplex search method for predicting unknown parameters in an annular Fin subjected to thermal stresses, J. Thermal Stresses 37, 236 - 251 (Taylor & Francis) (Q1: Material Science / Condensed Matter Physics).

14. R. Das, A. Mallick, K .T. Ooi, 2013, 'Inverse estimation of heat transfer coefficient and thermal conductivity in a conductive-convective and radiative fin'. J. Heat &Mass Transfer, 49, 1029 - 1038 (Springer). (Q3: Mechanics / Thermodynimics)

13. A. Mallick*, 2013 ‘Effect of second phase mobile and immobile particles on polycrystalline grain growth: A Phase field approach’, Computational Materials Science, 67: 27 – 34 (Elsevier). (Q2)

12. A. Mallick*, K.S. Tun and M. Gupta, 2012, ‘Deformation behaviour of Mg/Y2O3 nanocomposite at elevated temperatures’, Material Science and Engineering - A, 551, 222 - 230 (Elsevier). (Q1: Matallurgy & Metallugical Engg.)

11. A. Mallick*, 2011, ‘Tensile properties of Ultrafine Mg-3%Al alloy at elevated temperatures’, Int. J. Mat. Research, 102, 48 -53 (Carl Hanser, Germany).

10. A. Mallick, K.S. Tun, S. Vedantam, and M. Gupta, 2010 ‘Mechanical Characteristics of Pure Mg and Mg/Y2O3 Nanocomposite in 25–250°C Temperature Range’, J. of Material Science, 45, 3058 – 3066 (Springer).

9. S. Vedantam, and A. Mallick, 2010, ‘Phase field theory of grain growth in the presence of mobile second phase particles’, Acta Materialia, 58, 272-281 (Elsevier). (Q1: Matallurgy & Metallugical Engg.)

8. S. Vedantam, and A. Mallick, 2010, ‘Theory of grain growth in the presence of mobile second phase particles’, Submitted to Phyl. Magazine (Taylor & Francis).

7. A. Mallick, and S. Vedantam, 2009, ‘Phase field study of the effect of grain boundary energy anisotropy on grain growth’, Computational Materials Science 46, 21-25 (Elsevier).

6. A. Mallick, S. Vedantam, and L. Lu, 2009, ‘Grain size dependent tensile behavior of Mg-3%Al alloy at elevated temperatures, Material Science and Engineering A, 515, 14-18 (Elsevier). (Q1: Matallurgy & Metallugical Engg.)

5. A. Mallick, 2009, ‘Nanocrystalline Mg-3%Al alloy: its synthesis and investigation of its tensile behavior’, Int. J. of Engg. & App. Sci., 5 (6), 411 - 414.

4. P.C. Dumir, G.P. Dubey, and A. Mallick, 2005, ‘Axisymmetric buckling of Laminated Thick Annular Spherical Cap’ Communications in Nonlinear Science and Numerical Simulation, 10, 191–204 (Elsevier). (Q1: Mechanics /Physics / Mathematical)

3. P.C. Dumir, G.P. Dubey, and A. Mallick, 2003, ‘Axisymmetric Static and Dynamic Buckling of Laminated Thick Truncated Conical Cap’, Int. Journal of Nonlinear Mechanics, 38, 903–910 (Elsevier). (Q2: Mechanics)

2. P.C. Dumir, G.P. Dubey, and A. Mallick, 2001, ‘Axisymmetric Postbuckling of Moderately Thick Laminated Annular Plate’, Composite Structure, 51, 311–318 (Elsevier). (Q1: Mechanics / Mateial Science)

1. G.P. Dubey, P.C. Dumir, and A. Mallick, 2000, ‘Dynamic Buckling of Laminated Thick Shallow Spherical Cap Based On a Static Analysis’, Mechanics Research Communication, 27, 561–566 (Elsevier). (Q2: Mechanics)

Papers in conference abstract volumes / presented

Conference Papers ( * indicates paper presenter)

34. A. Mallick, Surja Deka, Vivek Kr. Sharma, Ashutosh Kumar. STRAIN RATE DEPENDENT MECHANICAL BEHAVIOR OF NANOSTRUCTURED MG- 3%AL ALLOYS, J. of Int. Sci. Publications: Materials, Methods & Technologies 17, 53-62 (2023). https://www.scientific-publications.net/en/article/1002687/

33. Surja Deka^*, Farzin Mozafari and Ashis Mallick, 2023, Deformation behavior of nanostructured aluminum: Experiment and computational study, Materials Today: Proceedings, DOI: https://doi.org/10.1016/j.matpr.2023.03.577

32. Vivek Sharma^*, Shakti Kumar and Ashis Mallick, 2023, Light Weight MnTiAlNiFe High-Entropy Alloy (LWHEA) Fabricated by Powder Metallurgy Process: Mechanical, Microstructure, and Tribological Properties, Materials Today: Proceedings, DOI: https://doi.org/10.1016/j.matpr.2023.04.157.

31. A. Mallick^* and S. Deka, 2023, Stresses in a Functionally Graded Rotating Disk Subjected to Thermal Loading , AIP Conf. Proc. 2894, 020009 (2023), doi.org/10.1063/5.0162884.

30. M Alamgir, S Shahabuddin, A Mallick, GC Nayak, 2022, Processing of pHEMA/TiO2 based nanocomposites used as an excellent dental material, Materials Today: Proceedings, 62, 7088-7091.

29. G.K. Sharma, N. Kumar, D. B. Singh, A. Mallick, 2020, Exergoeconoic analysis of single slope solar desalination unit coupled with PVT-COCs by incorporating the effect of dsissimilarity of the rate of flowing fluid mass, Materials Today : Proceedings (In press: Online available).

28. M.S. Kujur, A. Deshpande, A. Mallick, M. Gupta, 2020, Development of rare-earth oxide reinforced magnesium nanocomposites targeting biomedical applications, Materials Today: Proceedings (In press, online available)

27. A Dewangan, A Mallick, AK Yadav, A.K. Richhariya, 2020, Effect of metal oxide nanoparticles and engine parameters on the performance of a diesel engine: A review, Materials Today: Proceedings 21, 1722–1727.

26. A Dewangan, A Mallick, AK Yadav, R Kumar, 2020, Combustion- generated pollutions and strategy for its control in CI engines: A review, Materials Today: Proceedings 21, 1728–1733.

25. M.S. Kujur, V. Manakari, G. Parande, S. Prasadh, R. Wong, A. Mallick and M. Gupta. 2019 “Rare-earth Oxide Reinforced Magnesium Nanocomposites: A Potential Candidate for Automotive and Biodegradable Implant Applications.” 27th International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXVII), 27-29 May 2019, Jonkoping, Sweden. Page 214 - 223

24. M. S. Kujur; V. Manakari ; G. Parande ; S. Prasadh ; R. Wong ; A. Mallick ; M. Gupta ; 2019, Effect of Rare Earth Oxide Nanoparticles on the Mechanical and Biological Properties of Magnesium, Ms&T-19 (Material Science and Technology) Conference, 29 Sep - 03 Oct, 2019, Portland, OREGON, USA. DOI: 10.7449/2019mst/2019/mst_2019_1121_1129

23. A. Mallick, D. K. Prasad and P. P. Behera, 2018, Thermo-mechanical Analysis of a Radiative Annular Fin, Thermophysics 2018, AIP Conf. Proc. 1988, 020029-1–020029-6.

22. P. Kumar, M. S. Kujur, A. Mallick, K. S. Tun and M. Gupta, 2018, Effect of graphene nano-platelets on the mechanical properties of Mg/3wt%Al alloy-nanocomposite, IOP Conf. Series: Materials Science and Engineering 346 (2018) 012001.

21. Md Alamgir, S. K. Tiwari, A. Mallick, G.C.Nayak, 2018, Graphene oxide and TiO2 based PMMA nanocomposites for dental applications: A comprehensive study of the mechanical properties, IOP Conf. Series: Materials Science and Engineering 377, 012082.

20. P. Kumar M. S. Kujur, A. Mallick, K. S. Tun and M. Gupta, 2017, Processing and characterization of Mg-3%Al/Graphene nanocomposite, METAL 2017, 24th - 26th May, Brno, Czech Republic, EU.

19. Ashis Mallick and R. Ranjan, 2017, Thermo-mechanical analysis of a functionally graded annular fin, 23rd Int. Conference on Engineering Mechanics, 15 – 18 May, Svratka, Czech Republic, 614-617.

18. R. Ranjan, A. Mallick, 2015, Thermal stresses in an annular fin with temperature dependent thermal parameters : Use of HPM, 23rd National Heat and Mass Transfer and 1st International ISHMT-ASTFE Heat and Mass Transfer (An Int. Conf.) IHMTC-2015, 17 - 20, December, 2015, ISRO-Trivandrum, Kerala.

17. S. Mundra, R. Ranjan, A. Mallick, 2014, Application of Mean Value theorem for thermal stresses in an annular fin, 59th Cong. of ISTAM (An Int. Conf.), 17 - 20, December, 2014, Bangalore, India.

16. A. Mallick, P.K. Sarkar, S. Chakraborty, and A. Kumar, Mechanical Behaviour of Nanostructured Mg-3%Al alloy, PFAM – XXII (Int. conf.), 18 – 20, Decemebr, 2013, Singapore.

15. S. Gogoi, J. Saikia, N. Meena and A. Mallick, 2013, Effect of Machining Parameters on the Surface Roughness of Mg/Y2O3 Nano-composite, National Conf. on Recent Trade in Manufacturing Sci. & Tech. (RTMST-2013), NITTTR, India.

14. A. Mallick, S. Vedantam, and L. Lu, 2010, Tensile behaviour of ultrafine-grained and nanocrystalline Mg-3%Al studied at elevated temperatures, Int. Conf. on Nanomaterials: Synthesis, Characterization and Application, India.

13. A. Mallick, K.S. Tun, S. Vedantam, and M. Gupta, 2009, ‘High Temperature Tensile Characteristics of a Mg/Y2O3 Nanocomposite’, Int. Conference on Advanced High-Temperature and High-Strength Structural Materials, Hong-Kong.

12. A. Mallick, and S. Vedantam, 2009, ‘Phase field simulation of polycrystalline grain growth in presence of mobile second phase particles’, American Institute of Physics (AIP) proceedings, 1091, 240 – 242.

11. S. Vedantam, and A. Mallick, 2009, ‘Phase field simulation of grain growth in the presence of mobile second phase particles’, 10th U.S. National Congress for Computational Mechanics, 16-19, July, 2009, USA.

10. S. Vedantam, and A. Mallick, 2008, ‘Phase field simulation of grain growth in presence of mobile second phase particles: A bi-crystal model’, Appeared in 10th Granada Seminar on Computational and Statistical Physics: Modeling and Simulation of New Materials, Spain.

9. A. Mallick, and S. Vedantam, 2008, ‘Effect of Grain Boundary Energy Anisotropy and Presence of Mobile Particles on Grain Growth: A Phasefield Approach’, Phase-field-Simulations: Materials Science meets Biology and Medicine’, An International Focus Workshop, Max-Planck Institute, Germany (Poster presentation).

8. A. Mallick, S. Vedantam, and L. Lu, 2008, ‘Ultrafine Mg-3%Al alloy: Its synthesis and investigation of its tensile properties at elevated temperature’, Appeared in the proceeding of PMP III, Bangkok.

7. A. Mallick, 2007, ‘Relations Among Axisymmetric Solutions of Annular Isotropic Plates With Linearly Varying Thickness For Levinson and Kirchhoff Theories’, Appeared in the Proc. of Int. Conference on Theoretical, Applied, Computational, and Experimental Mechanics, December, IIT Kgp.

6. A. Mallick, 2005, ‘Exact bending relationship between higher-order Levinson and thin plate solutions for an axisymmetric annular plate with linearly varying thickness’, Appeared in the Proc. of Int. Conference on Mech. Engg., AM-48, 1-6 (Dhaka).

5. A. Mallick, R. Sharma, 2004, ‘FE Analysis of Bending for an Axisymmetric Shear Deformable Circular Plate’, Appeared in the Proc. of National Conference on Precision Manufacturing, Dec., 2004.

4. A. Mallick, 2004, ‘Solution Zone for a Lamina of Graphite/Epoxy (Gy-70/934) with Combined Loading’, Appeared in the Proc. of National Conference on Fabrication and Processing of Composites and Light Materials (FPCL 2004), Jan, 2004

3. A. Mallick, and R. Kumar, 2003, ‘Axisymmetric Levinson Annular Plates with Linearly Varying Thickness in Terms of Corresponding Kirchhoff Solutions’, Appeared in the Proc. of 48th Congress of Indian Society for Theoretical Applied Mechanics (An Int. Meet), December.

2. G.P. Dubey, P.C. Dumir, and A. Mallick, 2001, ‘Axisymmetric Buckling of Unsymmetrically Laminated Thick Truncated Conical Cap’, Appeared in the Proc. of 12th Indian Society of Mechanical Engineers (ISME) Conference.

1. P.C. Dumir, G.P. Dubey, and A. Mallick, 2000, ‘Galerkin Solution For Geometrically Non-linear Response of Thick Symmetrically Laminated Annular Plate’, Appeared in the Proc. of International Conference on Recent Advances in Mathematical Sciences (ICRAMS).

Patents

Patents (Details)

1. Patent Title: A hydraulic back pressure attachment for equal channel angular pressing (ECAP) for magnesium and its alloys and the method of working.

Application number: 202431066132 (Indian Patent)

Patent status: Published

Inventor Name: Vivek Sharma and Ashis Mallick

2. Title: A solid solution phase high-entropy alloy with ultra-high strength, strong plasticity and wear resistance and a process for the preparation thereof.

Application number: 202531000505 (Indian Patent)

Patent status: Published

Inventor Name: Vivek Sharma and Ashis Mallick

Projects & Activities

Membership of Scientific Societies

Fellow of The Institution of Engineers (India), No.: F-1234028.
Life Member of Indian Society of Technical Education (ISTE, A Professional Body), Membership No: LM34289
Member of International Association of Engineers (IAENG, A Professional Body), Membership No: 101722

Other Academic and Administrative Activities

REVIEWER:

1. "Pegasus - Short" application (Postdoctoral fellowship application) to the Research Foundation Flanders – FWO (Belgium).

2. J. Polym. Materials.

3. Modelling and Simulation in Material Science & Engineering

4. J. of Material Sci. & Engineering

5. Sci. & Engineering of Composite Materials

6. Philosophical Magazine Letters

7. Defense Technology

8. Engineering Computations

9. Heat Transfer - Asian Research

10. Ain Shams Engineering Journal

11. International J. of Heat and Mass Transfer

12. Materials Research

13. International Journal of Thermal Sciences

14. J of Applied Polymer Science

15. Journal of The Institution of Engineers (India)

16. Materials Research Express.

17. Applied Surface Science

18. Bioactive Materials

19. Journal of Magnesium and Alloys

20. Materials Today Communications

21. Case studies in thermal engineering

22. Materials Chemistry and Physics

23. Heliyon

24. Tribology and Materials

25. Tribology International

26. Acta Biomaterialia

27. Ph.D. Thesis of Jadavpur University, BITS Pilani, VSSUT Burla.

EDITORIAL BOARD MEMBER:

International Journal of Metallic Materials

ADMINISTRATIVE ACTIVITIES:

Hostel Warden, NERIST, Nirjuli - 79119
Chairman, Transport (2010 - 2011), NERIST, Nirjuli - 79119
Vice-chairman Exam for School of Engineering (Spring Sem. 2012), Tezpur University
Coordinator (2015 - 2018), M.Tech. (Design), IIT Dhanbad
Associate Dean (Student Welfare) (2018-2021), IIT Dhanbad
Coordinator, Industry Institute Interaction Facility (IIIF), Kolkata and Delhi Centre (2018 - 2021)
Member of Faculty Selection Committee

Guidance

Project/Ph.D. Positions available:

Position: Junior Research Fellow (in Metal Matrix / polymer matrix nanocomposites)

Qualification: M. Tech. in Mechanical Engg. /Material Science or equivalent/ MSc Tech. polymer science/or relevant discipline from a reputed institute.

Position: Junior Research Fellow (in thermal stresses in an FGM axisymmetric problem)

Qualification: M. Tech. in Mechanical Engg. (Solid Mechanics /Design / Heat transfer)/ M.Sc. Tech in applied mathematics or relevant discipline from a reputed institute

You may drop your CV to mallick@iitism.ac.in

Doctoral student supervised / ongoing

Student Dissertation List

#	Name	Supervisor(s)	Dissertation topics	Fellowship	Remarks
1	Rajeev Ranjan (2013 - 2017)	Sole	Thermal Stress Distribution Analysis of Annular Fin Using Homotopy Perturbation Method	Institute Fellow	Assistant Professor NIT Andhra Pradesh
2	Pranab Kanti Roy (2013 - 2018)	Sole	Heat Transfer Analysis of Longitudinal Fins with Multiple Non-linearities	Self Sponsored	Principal School of Engineering Seacom Skills University, Birbhum, W.B
3	Bimla Kumari (2013 - 2018)	Jointly with Prof. A. Dixit	Mechanical and Machining characterization of Mg-Based Nanocomposites	Institute Fellow	Post-doctoral research fellow at CRF, IIT (ISM) Dhanbad
4	Md. Alamgir (2015 - 2020)	Jointly with Prof. G.C. Nayak	Development of Polymeric Nanocomposites Reinforced by 2-D Nanoparticles Targeting to Enhance the Mechanical Properties	DST Fellow	******
5	Milli Suchita Kujur (2015 - 2020)	Jointly with Prof. M. Gupta (NUS, Singapore)	Development of Rare Earth Oxide Reinforced Magnesium Nanocomposites for Structural/Biomedical Applications	Institute Fellow	Post-doctoral research scientist at Helmholtz-Zentrum Hereon, Germany
6	Pravir Kumar (2015 - 2020)	Sole	Synthesis and Characterization of Mg-Alloy Nanocomposites Reinforced by Graphene-Based Nanoparticles	Institute Fellow	Assistant Professor Mechanical Engineering Department Jharkhand University of Technology, Ranchi
7	Sanjeev K. Sharma (2014 - 2021)	Jointly with Prof. S. Gupta (IIT Bhu)	Energy Metrics and Efficiency Analyses of Active Solar Energy Based Water Desalination Systems	Self sponsored	Assistant Professor Mechanical Engineering Department Amity University, Noida, India
8	Ashish Dewangan (2016 - 2023)	Jointly with	Experimental Investigation on Compression-Ignition (CI) Engine Fueled with Biodiesel/Diesel Blends	Self sponsored	Assistant Professor Mechanical Engineering Department Galgotias College of Engineering & Technology
9	Surja Deka (2018 - 2024)	Jointly with Prof. M. Gupta (NUS, Singapore) Prof. T. Thamburaja (UKM, Malaysia)	Experimental and computational study of lightweight nanostructured and nanocomposite materials for structural and biomedical applications	AISTDF Fellow (ASEAN-India Science & Tech. Development Fund)	Senior Design Engineer Hi-point technical services pvt. Ltd., Mumbai
10	Vivek Kr. Sharma (2018 -2025)	Sole	Development of low entropy alloy-based nanocomposite to high entropy alloys and its characterization	DST Fellow	Product Development Head Blujay Robotics Pvt. Ltd., Pune
11	Gaurav Kr. Sharma (2018 - 2025)	Jointly with Prof. N. Kumar Prof. D.B. Singh	Effect of input parameters on the performance of active solar still for sustainable distillation	Self sponsored	Assistant Professor Mechanical Engineering Department CET - IILM Academy of Higher Learning
12	Rakesh R Srivastava (2015 - 2025	Jointly with Dr. Gupta (ISRO) and Dr. S. Suresh (ISRO)	High temperature deformation studies of Fe-Ni and Ni-base alloys XH 43 and XH 62 for aerospace applications	Self sponsored	Scientist - G ISRO, Thiruvananthapuram
13	Haridwar Prasad (2017 - ongoing)	Jointly with Prof. N. Kumar Prof. D.B. Singh	****	Self sponsored
14	Bihar Gourav (2019 - ongoing)	Sole	****	Institute Fellow	Assistant Professor Mechanical Engineering Department SPNREC Araria, Bihar
15	Ashutosh Kumar (2022 - ongoing	Sole	****	Institute Fellow	Ongoing Research

Master students

Student Dissertation List

#	Name of Student	Supervisor(s)	Dissertation topics	Year of passing	Remarks
1	Abhay Gupta	Sole	Bending analysis of shear deformable circular plates	2015	Joined Ph.D. at IITG
2	Aditya Prakash Yadav	Sole	Thermal stress analysis of an annular fin with variable thermal conductivity using FEM	2015
3	Gaurav Tiwari	Sole	Mechanical and microstructural characterization of ultrafine grained Mg-3%Al alloy	2015
4	Mr. Surya Deka (Gold medalist)	Sole	Thermal stress in a functionally graded rotating disk	2016	Received AISTDF Fellowship Joined Ph.D. at IIT Dhanbad.
5	Ranjan Kumar	Sole	Thermal stress in hyperbolic profile	2016
6	Chandra Bhushan Kumar	with Dr. V. Ranjan	Free vibration analysis of isotropic rectangular plate with attached patch mass using classical plate theory and dynamic stiffness method	2017
7	Anand Pal	Sole	Thermal stresses in a rotating disk	2017
8	Prince Oliver Horo	Sole	Synthesis and characterization of polymer composite	2017
9	Kumar Vikrant Singh	Sole	Thermo-Mechanical analysis of FGM Rotating Disc	2018
10	Kunal Adhikary	Sole	Thermo-mechanical Analysis in Perforated Annular Fin	2018
11	Dhanwate Chetan Prakash	Jointly with Industry	Development of mathematical model and analysis of pitching, bouncing and rolling for optimum ride comfortability and handling of full car with 7DOF	2018
12	Kartikay Kumar	Sole	Graphene-reinforced aluminum matrix composites: Synthesis and investigation of its mechanical properties	2019
13	Rocky Raj Tilak	Sole	Thermal stresses in a FGM Cylinder	2019
14	Pankaj Kumar	Sole	Thermal stress analysis in FGM rotating disk (using FEM)	2019
15	Indramani	Sole	Design of porous fins	2019
16	Ankita Shrabornee (Gold medalist)	Jointly with industry	Design feature diagnostics for improving robustness of modellers	2019	Working in Siemens, USA
17	Deepak Kumar Sharma	Sole	Enhancement of mechanical properties of Copper by using Graphene Nanoplates	2019
18	Wilson Soren	Sole	Synthesis and characterization of Ni based hybrid metal matrix composite through microwave sintering	2020
19	Ved Prakash Dubey with Prof. Huang Wei Min (NTU, Singapore)	Sole	Project-1: Computational Modeling of Elastic Hinges for Space Applications using Shape Memory Polymer Composite Project-2: Effect on Mechanical Properties of Reinforced Particles in an Al-Alloy	2020	Research Fellow at Polish Academy of Science
20	Rajat Singh	Sole	Thermo-mechanical analysis of radially graded rotating disk	2020
21	Korthiwada Shashank	Sole	Computational plasticity based on elastic constitutive theory	2020	Coal India Ltd.
22	BADRI VISHAL AGRAHARI	Sole	ANALYSIS OF THERMAL STRESSES IN FGM CIRCULAR ROTATING TYPE FIN WITH VARIABLE THERMAL PARAMETER	2021
23	SANDIP BARIK	Sole	THERMAL ANALYSIS OF FIN USING ANSYS	2021
24	Sankalp Meshram	Sole	Optimization of design parameters for thermo-mechanical load using Taguchi design	2022
25	Saurabh Kumar	Sole	Elastic-plastic stress analysis of rotationally graded rotating disk	2023
26	Bivhu Mishra	Sole	Mechanical and Surface Characterization of High-Entropy Alloys	2023
27	Vimal Kr. Vishnoi	Sole	Parametric Study of Functionally Graded Material Rotating Disk Subjected to Mechanical and Thermal Stresses using a FEM Approach	2025	Sr. Officer, SUN Petrochemicals Pvt Ltd., Gujarat
28	Kunal Banduji Dudhankar	Sole	Parametric Study of Functionally Graded Material Rotating Disk Subjected to Thermo-mechanical Loading using an Analytical Approach	2025	Postgraduate Engineering Trainee, L&T Chennai

Admission

Alumni

Faculty

Students

The Institute

Academics

Faculty & Staff Opening

Sustainability

Centenary Events

Faculty details

Prof.Ashis Mallick

Teaching

Academics

Ph.D. in Mechanical Engineering

Thesis Title: Phase-Field Simulation of Grain Growth in Presence of Second Phase Particles

Master of Technology(M.Tech) in Applied Mechanics

Thesis Title: Buckling of Laminated Thick Annular Plates and Shallow Caps

Bachelor of Engineering (BE) in Mechanical Engineering

Project: Design and optimization of surfaces for auto-manipulation of sessile drops (2009)

Position

Awards and Honors

Fellowship Awarded

External Grant Received

Publications

Books Published

List Of Research Publications (only in Peer-reviewed Journals)

Papers in conference abstract volumes / presented

Patents

Projects & Activities

Sponsored Research Projects (External Funded)

Membership of Scientific Societies

Other Academic and Administrative Activities

Guidance

Student Dissertation List

Student Dissertation List

`Thesis Title: Phase-Field Simulation of Grain Growth in Presence of Second Phase Particles`

`Thesis Title: Buckling of Laminated Thick Annular Plates and Shallow Caps`

`Project: Design and optimization of surfaces for auto-manipulation of sessile drops (2009)`